Registering your RICOH THETA Camera

Before using the mobile app please follow the instructions below to register your THETA.

Registering your RICOH THETA camera

It is recommended that you always use the latest version of the RICOH THETA firmware.
For instructions on how to check and update the firmware, please refer to the instruction manual at the link below.
https://help.ricohtours.com/hc/en-us/articles/4410295024147
*Make sure that your RICOH THETA is fully charged.

Note: If a dialog box appears during the registration or shooting steps below asking for permission to connect to a photo, network or location services, click OK. This is necessary for the RICOH360 Tours app to work properly.

  1. Log in to the RICOH360 Tours mobile app.
  2. Tap the settings option found on the bottom right of your your screen Screen_Shot_2022-02-11_at_4.32.55_PM.png
  3. Tap RICOH THETA
  4. Tap Register your THETA
  5. Tap Register your THETA
  6. Enter the Serial No. on the bottom of the camera (Both letters and numbers) for example: YP12345678
  7. Tap NEXT
  8. Press the power button on the camera to turn it on
  9. Press the wireless button on the camera to turn on the wireless (the wireless lamp will blink)
    *For RICOH THETA X, swipe the display panel from top to bottom, and tap the wireless icon in the upper left corner.
    thetaxdisplay.png
  10. Tap Register
  11. On the connection screen, tap Join
  12. When you get the dialog box with "Connection completed". Tap OK

Your THETA is now registered to this device.

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request