Adding photos to your tour

Now that you have created a tour, you can continue to add images from the RICOH THETA, your camera roll or your mobile camera. If this is the first time using the RICOH360 Tours application you might want to follow the step-by-step article found here.

RICOH THETA 

  1. Make sure your RICOH THETA is on and that WiFi has been selected
  2. Exit the app and launch the Settings app
  3. Select Connections & Wi-Fi (Android) or just Wi-Fi (Apple)
  4. Select the Wi-Fi entry for your RICOH THETA
  5. Enter your Passcode if you have not previously provided one (this is the numbers found on the bottom of your THETA)
  6. Launch the RICOH360 Tours application
  7. Tap on Screen_Shot_2020-11-09_at_5.32.25_PM.png to select your tour
  8. Select the Tour you would like to add photos to
  9. Tap Add Photo
  10. Tap onScreen_Shot_2020-11-09_at_3.28.15_PM.png  to select the RICOH THETA camera
  11. If requested, tap OK to allow RICOH360 Tours access to your photos
  12. Tap the Screen_Shot_2020-11-09_at_3.51.06_PM.png Shutter button to take your photo
  13. Type in the label that describes the photo or select one from the list
  14. Tap Done

Mobile Camera

  1. Launch the RICOH360 Tours application
  2. Tap on Screen_Shot_2020-11-09_at_5.32.25_PM.pngTours
  3. Select the Tour you would like to add photos to
  4. Tap Add photo
  5. Tap Screen_Shot_2020-11-09_at_5.39.44_PM.pngto use the camera on your mobile device
  6. If requested, tap OK to allow RICOH360 Tours to access your camera
  7. Press the shutter button Screen_Shot_2020-11-09_at_3.51.06_PM.png to take your photo
  8. Tap Use Photo
  9. Type in the label that describes the photo or select from the list of pre-defined room names
  10. Tap Done 

Photo Gallery

  1. Launch the RICOH360 Tours application
  2. Tap on
  3. Screen_Shot_2020-11-09_at_5.32.25_PM.png
  4.  Tours
  5. Select the Tour you would like to add photos to
  6. Tap + Add photo
  7. Tap Screen_Shot_2020-11-09_at_5.39.56_PM.png to select photos from your photo library
  8. Select the folder where your photo is located
  9. Select the photo you would like to use
  10. Type in the label that describes the photo
  11. Tap Done 

 

Was this article helpful?

2 out of 7 found this helpful

Have more questions? Submit a request